Service Packer Sanp SET-II
Service Packer Sanp SET-II
Snap Set-II Packer is a compression set tool requiring only straight set down weight (slack) to pack-off. It is run above in tandem with other packers such as the Set-III or Set-IXS.
Snap Set-II Packer is ideal to selectively treat, produce or inject in multiple zone completions. It is also used to isolate casing hole perforation.
The packer is also equipped with an internal latch to prevent pre-setting when running. Upon releasing, the latch re-engages to allow movement down hole.
Features
- Large internal by-pass, Set down to pack off, pick up to release
- Differential pressure holds valve closed
- Three (3) element packing system
- Keyed for rotation through packer
- Running-In by pass feature
Benefits
- No rotation required to set
- Cost effective
- Straight pick up release
Applications
- Treating and injecting multiple zones
- Isolating casing holes and perforations
- Where tubing rotation is prohibited
- Low pressure wells
Technical Parameter
- Pressure Rating: up to 7,500 psi (maximum).
- Temperature rating: up to 450°F
Material
- L-80, P110, 13% Cr 1 Moly, INCONEL-825, AISI 4140 80/110 KSI
Elastomer
- Nitrile, Viton, HNBR, Aflas, Silicon
Size
- 4-1/2 to 20.0 in
| TECH UNIT No. | 080 |
|---|---|
| MODEL | VE-SS-II |
