Mechanical Setting Tool
Mechanical Setting Tool
The Mechanical Setting Tool (MST) is designed to run and mechanically set a Cement Retainer or converted Bridge Plug at any depth on tubing or drill pipe. It is used whenever it is advantageous to deploy a Cement Retainer or Bridge Plug on tubing or drill pipe, allowing cement retainers to be set, pressure tested, and squeezed in a single trip.
The MST and the Cement Retainer or Bridge Plug are shear-pinned together, with the slips held in a retracted position to ensure safer running.
Features and Applications
- Allows single run for squeeze cementing
- Locked to cement retainer or bridge plug to avoid premature setting or loss
- Top slips partially covered to protect from accidental damage and pre-set
- Will set other manufactures cement retainer or bridge plug
- Setting cement retainers or bridge plugs on tubing or drill pipe
- Shear pinned to cement retainer or bridge for safety
- Allows user to set, pressure test tubing and squeeze in single trip
- Can quickly be configured to set cement retainers or bridge plugs
- Drag blocks field proven design for long life
Technical Parameter
- Pressure Rating: up to 10,000 psi (maximum).
- Temperature rating: up to 500°F
Material
- L-80, P110, 13% Cr 1 Moly, INCONEL-825, AISI 4140 80/110 KSI
Elastomer
- Nitrile, Viton, HNBR, Aflas, Silicon
Size
- 4-1/2 to 20.0 in
| TECH UNIT No. | 044 |
|---|---|
| MODEL | VE-MST |
