Anchor Latch Seal Assembly
Anchor Latch Seal Assembly
The Anchor Latch assembly is used to anchor the tubing in the seal bore packer. Anchor latch will automatically latch in to packer when weight is applied.
The Anchor Latch Seal Assembly is used when floating seals are not required. This assembly allows the tubing string to be in tension or compression.
To release from the packer pull 1000 to 2000 lb tension over tubing weight and rotate 10 to 12 rounds to the right at the packer.
Premium thread connections available upon request.
Features
- Anchor latch assemblies are manufactured from materials that comply with NACE
- MR-01-75 standards for sulfide stress cracking –resistance metallic materials and
- Fitted with PAT seal stack (PEEK – NITRILE -TEFLON).
- Viton, NITRILE, and chevron seals are available for hostile operation., such as high temperature, high pressure and H2S environments suitable for 10,000 Psi., & 350 to 600 Deg. F.
Technical Parameter
- Pressure Rating: up to 10,000 psi (maximum).
- Temperature rating: up to 600°F
Material
- L-80, P110, 13% Cr 1 Moly, INCONEL-825, AISI 4140 80/110 KSI
Elastomer
- Nitrile, Viton, HNBR, Aflas, Silicon, PTFE
Size
- 2-3/8 to 13-3/8 in
| TECH UNIT No. | 053 |
|---|---|
| MODEL | VE-ALSA |
